unisonic technologies co., ltd mgbr10l60c diode www.unisonic.com.tw 1 of 3 copyright ? 2014 unisonic technologies co., ltd qw-r601-137.c dual mos gated barrier rectifier ? description the utc mgbr10l60c is a dual mos gated barrier rectifiers, it uses utc?s advanced technology to provide customers with low forward voltage drop and high switching speed, etc. ? features * low forward voltage drop * high switching speed ? symbol ? ordering information ordering number package pin assignment packing lead free halogen free 1 2 3 mgbr10l60cl-ta3-t MGBR10L60CG-TA3-T to-220 a k a tube mgbr10l60cl-tf3-t mgbr10l60cg-tf3-t to-220f a k a tube mgbr10l60cl-tn3-t mgbr10l60cg-tn3-t to-252 a k a tube mgbr10l60cl-tn3-r mgbr10l60cg-tn3-r to-252 a k a tape reel note: pin assignment: a: anode k: common cathode ? marking information package marking to-220 to-220f to-252
mgbr10l60c diode unisonic technologies co., ltd 2 of 3 www.unisonic.com.tw qw-r601-137.c ? absolute maximum ratings (per leg) (t a =25c unless otherwise specified) single phase, half wave, 60hz, resistive or inductive load. for capacitance load, derate current by 20%. parameter symbol ratings unit dc blocking voltage v rm 60 v working peak reverse voltage v rwm 60 v peak repetitive reverse voltage v rrm 60 v average rectified forward current (rated vr-20khz square wave) ? 50% duty cycle per leg i o 5 a total 10 a non-repetitive peak forward surge current 8.3ms single half sine-wave superimposed on rated load i fsm 120 a peak repetitive reverse surge current (2 s-1khz) i rrm 2 a operating junction temperature t j -65~+150 c storage temperature t stg -65~+150 c note: absolute maximum ratings are those values be yond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. ? thermal characteristics (per leg) parameter symbol ratings unit junction to ambient to-220/to-220f ja 62.5 c/w to-252 110 junction to case to-220 jc 2 c/w to-220f 3.31 to-252 2.5 ? electrical characteristics (t a =25c, unless otherwise specified.) parameter symbol test conditions min typ max unit reverse breakdown voltage (note 1) v ( br ) r i r =0.50ma 60 v forward voltage drop v fm i f =5a, t j =25c 0.63 v i f =5a, t j =125c 0.58 v leakage current (note 1) i rm v r =60v, t j =25c 50 300 a v r =60v, t j =125c 15 50 ma notes: 1. short duration pulse test used to minimize self-heating effect. 2. thermal resistance junction to case mounted on heatsink.
mgbr10l60c diode unisonic technologies co., ltd 3 of 3 www.unisonic.com.tw qw-r601-137.c ? typical characteristics 0 25 50 75 100 125 150 175 0 2 4 6 8 10 12 14 16 i n s t a n t a n e o u s f o r w a r d v o l t a g e ( v ) 0.1 1.0 0.4 125c 25c instantantaneous forward current (a) 0.2 10 100 0.6 0.8 1.0 t y p i c a l f o r w a r d c h a r a c t e r i s t i c s average rectified current (a) f o r w a r d d e r a t i n g c u r v e 25 50 75 100 125 150 1e-2 1e-3 1e-4 1e-5 1e-6 1e-1 1e-7 case temperature (c) instantaneous reverse current (a) typical reverse characteristics v r =60v if pulse width=300us case temperature (c) utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
